Advertisement Advertisement
Advertisement Advertisement

KTH researchers develop 100 percent renewable translucent wood

Five years after introducing see-through wood building material, researchers at the Royal Institute of Technology (KTH) in Sweden have taken it to another level. They found a way to make their translucent wood composite 100 percent renewable – and more translucent – by infusing wood with a clear bio-plastic made from citrus fruit.

The latest version of transparent wood developed at KTH is more translucent, and it is made with renewable polymer (photo courtesy Céline Montanari).

Since it was first introduced in 2016, transparent wood has been developed by researchers at the Royal Institute of Technology (KTH) in Stockholm as one of the most innovative new structural materials for building construction. It lets natural light through and can even store thermal energy.

The key to making wood into a transparent composite material is to strip out its lignin, the major light-absorbing component in wood. But the empty pores left behind by the absence of lignin need to be filled with something that restores the wood’s strength and allows light to permeate.

From orange juice to renewable construction material

In early versions of the composite, researchers at KTH’s Wallenberg Wood Science Center used fossil-based polymers. Now, the researchers have successfully tested an eco-friendly alternative: limonene acrylate, a monomer made from limonene derived from citrus peel.

The results have been presented in a paper “High Performance, Fully Bio-Based, and Optically Transparent Wood Biocomposites” published in the journal Advanced Science.

The new limonene acrylate is made from renewable citruses, such as peel waste that can be recycled from the orange juice industry, said Céline Montanari, lead author and Ph.D. student at KTH.

The new composite offers optical transmittance of 90 percent at 1.2 mm thickness and a remarkably low haze of 30 percent, the researchers report.

Unlike other transparent wood composites developed during the past five years, the material developed at KTH is intended for structural use. It shows heavy-duty mechanical performance: with a strength of 174 MPa (25.2 ksi) and elasticity of 17 GPa (or about 2.5 Mpsi).

Yet all along, sustainability has been a priority for the research group, says Professor Lars Berglund, the Head of KTH’s Department of Fibre and Polymer Technology.

Replacing the fossil-based polymers has been one of the challenges we have had in making sustainable transparent wood, Professor Berglund said.

Environmental considerations and so-called green chemistry permeate the entire work, he says. The material is made with no solvents, and all chemicals are derived from bio-based raw materials.

Potential for nanotechnologies

According to Professor Berglund, the new advances could enable a yet unexplored range of applications, such as in wood nanotechnology. Possibilities include smart windows, wood for heat storage, wood that has built-in lighting function – even a wooden laser.

We have looked at where the light goes, and what happens when it hits the cellulose. Some of the light goes straight through the wood and makes the material transparent. Some of the light is refracted and scattered at different angles and gives pleasant effects in lighting applications, explained Professor Berglund.

The team is also working with Sergei Popov’s photonics group at KTH to explore the nanotechnology possibilities even further.

The research was supported with funding from the European Research Council (Grant No. 742733) and the Knut and Alice Wallenberg Foundation.

We're using cookies. Read more