Advertisement Advertisement
Advertisement Advertisement

Fraunhofer, SABIC, and P&G demonstrate closed-loop recycling of single-use facemasks

Germany's Fraunhofer Cluster of Excellence Circular Plastics Economy (CCPE) and its Institute for Environmental, Safety, and Energy Technology (UMSICHT) have developed an advanced plastics recycling process. Together with global chemicals company Saudi Basic Industries Corporation (SABIC), and consumer brand major Procter & Gamble (P&G), Fraunhofer UMSICHT has concluded an innovative circular economy pilot project to demonstrate the feasibility of closed-loop recycling of single-use facemasks.

In an innovative circular economy pilot project, Fraunhofer UMSICHT, Saudi Basic Industries Corporation (SABIC), and Procter & Gamble (P&G) have demonstrated the feasibility of closing the loop on facemasks to help reduce plastic waste and mitigate fossil resources depletion (graphic courtesy SABIC/Fraunhofer).

The coronavirus (COVID-19) pandemic has brought about the use of billions of disposable facemasks, an issue that is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including – parks, open-air venues, and beaches.

Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in waste-to-energy (WtE) plants also represents a loss of valuable feedstock for new material.

Recognizing the challenge, we set out to explore how used facemasks could potentially be returned into the value chain of new facemask production. But creating a true circular solution from both a sustainable and an economically feasible perspective takes partners. Therefore, we teamed up with Fraunhofer CCPE and Fraunhofer UMSICHT’s expert scientists and SABIC’s T&I specialists to investigate potential solutions, said Dr Peter Dziezok, Director R&D Open Innovation at P&G.

As part of the pilot, P&G collected used facemasks worn by employees or given to visitors at its manufacturing and research sites in Germany. Although those masks are always disposed of responsibly, there was no ideal route in place to recycle them efficiently.

To help demonstrate a potential step-change in this scenario, special collection bins were set up, and the collected used masks were sent to Fraunhofer for further processing in a dedicated research pyrolysis plant.

A single-use medical product such as a face mask has high hygiene requirements, both in terms of disposal and production. Mechanical recycling would have not done the job. In our solution, therefore, the masks were first automatically shredded and then thermochemically converted to pyrolysis oil. Pyrolysis breaks the plastic down into molecular fragments under pressure and heat, which will also destroy any residual pollutants or pathogens, such as the Coronavirus. In this way, it is possible to produce feedstock for new plastics in virgin quality that can also meet the requirements for medical products, explained Dr Alexander Hofmann, Head of Department Recycling Management at Fraunhofer UMSICHT, and Head of Research Department “Advanced Recycling” at Fraunhofer CCPE.

The pyrolysis oil was then sent to SABIC to be used as feedstock for the production of new polypropylene (PP) resin. The resins were produced using the widely recognized principle of mass balance to combine the alternative feedstock with fossil-based feedstock in the production process.

Mass balance is considered a crucial bridge between today’s linear economy and the more sustainable circular economy of the future.

The high-quality circular PP polymer obtained in this pilot clearly demonstrates that closed-loop recycling is achievable through the active collaboration of players from across the value chain. The circular material is part of our TRUCIRCLE portfolio, aimed at preventing valuable used plastic from becoming waste and at mitigating the depletion of fossil resources, emphasized Mark Vester, Global Circular Economy Leader at SABIC.

Finally, to close the loop, the PP polymer was supplied to P&G, where it was processed into non-woven fibers material.

This pilot project has helped us to assess if the closed-loop approach could work for hygienic and medical-grade plastics. Of course, further work is needed but the results so far have been very encouraging said Hansjörg Reick, P&G Senior Director Open Innovation.

The entire closed-loop pilot project from facemask collection to production was developed and implemented within only seven months. The transferability of advanced recycling to other feedstocks and chemical products is being further researched at Fraunhofer CCPE.

We're using cookies. Read more