Fabric made from VTT's recycled fibre feels half way between cotton and viscose
The method developed at VTT Technical Research Centre of Finland involves dissolving worn and discarded cotton and using it as a raw material for new fibre. The first product models demonstrate that recycled fibre can be transformed into a yarn and fabric.
Based on a carbamate dissolution process, the technology has been used to produce the first batch of recycled fibre in a pilot facility. The fabric made from the recycled fibre met VTT researchers Ali Harlin and Pirjo Heikkilä expectations: it is smooth with a subdued matt finish, drapes nicely and the fibre feels natural.
The method is much friendlier to the environment than the viscose process, in which carbon disulphide is needed for dissolution. In addition, polyester residues are removed from the cotton material using methods familiar from the pulp industry.
According to calculations during the technology commercialisation project, the carbon footprint of recycled fibre produced using carbamate technology is about a third smaller than for cotton and in the same category and as the most environmentally friendly viscose. The water footprint of the recycled fibre is around 2 percent of that of virgin cotton and 10 percent of viscose.
The yarn was spun at Tampere University of Technology from discarded cotton turned into fibre in VTT’s laboratory. The fibre’s characteristics rivalled those of commercial yarns when being spun. Following this stage, the first model products, gloves and flat-knitted fabrics, were made by knitwear company Agtuvi.
Continue R&D at the Infinited Fiber Company
According to VTT, R&D is still required in order to achieve process reliability. The Infinited Fiber Company startup has been established to advance the process design and licensing of the technology.
The spinning process is being developed towards industrial production through collaboration between VTT and the Infinited Fiber Company at VTT’s Bioruukki pilot centre. A range of cellulose fibres may be developed at a spinning unit built at Bioruukki earlier this summer.
Towards a closed loop: the Relooping Fashion Initiative and Telaketju
VTT’s method forms part of the TEKI project, which was launched internationally as the Relooping Fashion Initiative. The project involves piloting and modelling a closed-loop ecosystem in line with circular economy principles; the ecosystem will enable new industrial applications of previously unusable textile waste.
VTT, Ethica, the Helsinki Metropolitan Area Reuse Centre, Seppälä, Remeo, Pure Waste Textiles, RePack, Touchpoint and Lindström are involved in the project. The project is funded by Tekes and the participating businesses.
The collection and sorting of discarded textiles is also being developed via the Telaketju project jointly funded by Tekes and the Ministry of the Environment. This involves the creation of an ecosystem of companies and other actors, with the aim of taking Finland’s textile circular economy to the next level.