Metsä Fibre initiates pre-engineering related to EUR 1.7 billion worth of possible forest industry investments
In Finland, Metsä Fibre, part of forest industry major Metsä Group, has announced that it has begun pre-engineering projects related to building a new bioproduct mill in Kemi and a new sawmill in Rauma, Finland. If implemented in full, the total value of the investments would amount to approximately EUR 1.7 billion during 2020–2023. Final investment decisions are expected to be made in 2020.
According to a statement, if implemented, the investments in Kemi and Rauma would increase Finland’s annual income by approximately EUR 0.6 billion, exports by approximately EUR 0.7 billion, and the positive employment impact in the direct value chains would be roughly 2 000. The construction phases would generate a positive employment impact of approximately 11 500 person-years
Kemi bioproduct mill
The Kemi pulp mill related pre-feasibility study, launched in May 2018 has been finalized. The study included two alternatives: building a totally new bioproduct mill that would be clearly bigger in size than the current Kemi pulp mill or alternatively extending the life cycle of the current mill by modernizing several departments.
In the study, the availability of wood raw material and the development potential of Kemi’s industrial infrastructure and logistic connections were examined in particular.
Building a new bioproduct mill in Kemi was chosen for future development. The target for the now initiated pre-engineering project is to create conditions for building a bioproduct mill with an annual production capacity of approximately 1.5 million tonnes of softwood and hardwood pulp to Metsä Group’s current mill site in Kemi.
In addition to pulp, the mill would produce various other bioproducts. This mill would be the biggest wood processing unit in the Northern hemisphere. The new mill would replace the existing Kemi pulp mill which annual capacity is approximately 620 000 tonnes. The total investment would amount to approximately EUR 1.5 billion.
Over double pulpwood demand
The annual pulpwood consumption of the new Kemi bioproduct mill would be approximately 7.6 million cubic meters, which is roughly 4.5 million m3 more compared to the consumption of the current mill. The aim is to source the pulpwood for the mill from Finland. Securing the wood sourcing for the mill requires further studies to maximize the share of domestic wood.
The Kemi bioproduct mill would directly employ approximately 250 people and, in its entire direct value chain, roughly 2 500 people in total. There is an increase of 1 500 people compared to the current situation. The employment impact in the construction phase would be almost 10 000 person-years of which over half in Kemi.
The main planning premises of the new mill include totally fossil free operations and 250 percent self-sufficiency in electricity. The pulp production volumes would be sold to European and Asian customers as well as to Metsä Board’s, also a part of Metsä Group, linerboard mill located at the same mill site in Kemi. The final investment decision related to Kemi bioproduct mill is expected to be made in summer 2020.
State-of-the-art pine sawmill
Metsä Fibre has also commenced a pre-engineering project to build a pine sawmill at its mill site in Rauma. The estimated annual production of the sawmill would be approximately 750 000 m3 sawn wood. The new sawmill would be the most modern and efficient unit in its field in the world. The level of technology and utilization of data will be raised clearly higher compared to current sawmills.
The total investment would amount to approximately EUR 200 million. The new sawmill would directly employ approximately 100 people and, in its entire direct value chain roughly 500 people in total. The employment impact in the construction phase would be approximately 1 500 person-years.
The sawmill’s annual sawlog consumption would be approximately 1.5 million m3. Wood for the sawmill is planned to be sourced from Finland. The increased sawn timber volumes would be sold mainly to European and Asian customers. The final investment decision related to Rauma sawmill is expected to be made in early 2020.
Final investment decisions hinge on numerous variables
Securing wood sourcing, preconditions for smooth deliveries, development of world economy; and especially Asian economy, results of environmental impact assessments, environmental permits, development of financial markets and export financing as well as cooperation with several parties related to wood sourcing, logistics, town planning, and permits will impact the final investment decisions.
The 100 percent utilisation of wood raw material is central to Metsä Group’s unique bioproduct concept. Logs are used for sawn timber, plywood and LVL products, and pulpwood for pulp and other bioproducts. The global demand for pulp and sawn timber is growing. The bioproduct mill in Kemi and the next-generation sawmill in Rauma would enable significant growth in our business. Logs are the raw material for the sawmill. The by-products of sawn timber production, bark and dust, are used for bioenergy and chips for pulp production. The pulp mill generates bioenergy, which is used by the sawmill and the excess is sold to the national grid. The sawmill investment would enable fossil free production in the entire Rauma mill integrate, said Ismo Nousiainen, CEO of Metsä Fibre.